TUBE ACCESSORIES

P/N	Description	Sugg Retail
TUSH3	Tube Shield - Bright aluminum, twist lock for use with our TUS9C1 socket or any old Fender or Marshall amps	$3.10
TUSH4	Tube Shield 44mm tall	3.10
TUSH5	Tube Shield 55mm tall	4.15
TUSH6	Tube Shield 67mm tall	3.10
TUR005	Tube Retainer-STR - Nickel plated, spring loaded, over the top style 6L6GC/5881/EL34 retainer, designed to hold tubes in their sockets.	5.00
TUR010	Tube Retainer-EL84 - Spring Steel Tube retainer for EL84 type tubes.	3.75
TUR015	Tube Retainer 12AX7 - Spring steel tube retainer for 12AX7.	3.75
TUCO11	Tube Clamp - Steel clip for holding tubes in their sockets.	4.80
TUC015	Tube Retainer 5881 Tube	3.50

P/N	Description	Sugg Retail
TUS4C1	4 pin Tube Socket	$.90
TUS8C1	8-Pin Tube Socket - CHASSIS MOUNT - This ceramic socket can be top or bottom mounted. It works with a chassis cut out between 1" and 13/16". The perfect replacement for Fenders, Marshalls, etc. and requires no modifications to the chassis.	4.80
TUS8CIG	8-Pin Tube Socket - Chassis Mount Ceramic Socket with gold pins & mounting bracket. A beautiful socket Cutout 1" - 13/16" diam.	7.25
TUS8C2	8-Pin Tube Socket - CHASSIS MOUNT Ceramic Socket with tighter pin grips. Cutout 1" diam.	4.80
TUS8C3F	8-Pin Tube Socket - Chassis Mount-Ceramic Socket with an attached mounting flange. Requires a 1 1/8" chassis cutout.	4.80
TUS8C5F	8-Pin Ceramic Tube Socket - This new socket has a captured bracket which mounts to a chassis and 1 1/2" long leads to attach to a PC Board	5.00
TUS8C7	8-Pin Plastic Long PC leads w/mount bracket.	4.50
TUS8C8	8-Pin Ceramic Tube Socket. Chassis mount w/short PC leads. Tapped mounting holes.	4.50
TUS8C10	8-Pin Plastic Chassis Mount. USA	8.25
TUS8PC1	8-Pin Tube Socket - PC MOUNT - Phenolic socket.	2.65
TUS8PC2	8-Pin Ceramic - PC MOUNT - Ceramic socket.	4.80
TUS8PC2G	8-Pin Ceramic. PC MOUNT - with gold pins	5.95
TUS9C1	9-Pin Tube Socket - CHASSIS MOUNT - This new phenolic socket, with a base that accepts a tube shield (see above) mounts in a 3/4" hole. Requires no cutting or modification.	3.15
TUS9C2	9-Pin Tube Socket - CHASSIS MOUNT - Ceramic socket with mounting bracket. Cutout 7/8" diam.	4.80
TUS9C2G	9-Pin Tube Socket - Chassis Mount Ceramic Socket with gold pins and mounting bracket.	6.75
TUS9C3	9-Pin Tube Socket - Chassis Mount-Ceramic Socket — a base that accepts our TUSH3 tube shield (see above). Mounts in a 7/8" hole.	4.80
TUS9PC1	9-Pin Tube Socket - PC MOUNT - Phenolic socket, standard socket used by most manufacturers.	2.85
TUS9PC2	9-Pin Ceramic Tube Socket - A small footprint ceramic socket.	3.15
TUS9PC2L	9-Pin Ceramic Tube Socket 21mm	4.80
TUS9PC3	9-Pin Ceramic Tube Socket - A PC Mount socket that also has a mounting bracket. The ceramic design allows for easy tube plug in.	3.75
TUS9PC4	9-Pin Tube Socket - PC MOUNT - CERAMIC.	3.75
TUS9PC4G	9-9-Pin Tube Socket - PC MOUNT - with gold pins	4.50
TUS9PC5	9-Pin Tube Socket. PC MOUNT - Phenolic Socket with a baxe that accepts our TUSH3 tube shield.	3.15
TUS9PC6	9 pin Ceramic Socket. with Skirt for TUS3 shield	4.50
TUS9PC7	9 pin Ceramic with Tube shield Skirt. PC MOUNT with shield ground	4.50
TUS9PC9C	9 pin Ceramic PC MOUNT	3.95
TUS9PC13	9 pin Ceramic Socket with attached mounting rings and long PC Leads	4.50
TUS9PC14	9 pin Ceramic Socket with attached mounting rings with tapped mounting holes and long PC Leads	4.50

Tube Testing Accessories

EQBM2 Ruby BiasTester (w/1 set of probes) Sugg Retail: 135.00
The most accurate way to set bias in an amplifier, the Ruby BiasTester has a built-in current meter and two adaptors for measuring the plate current on power tubes.

Features
The Ruby BiasTester features a 3.5 digit display. Tubes with common octal bases can be measured, such as 6L6 (5881), 6V6, 7027, EL34, 6550, KT66, KT88, KT100, or similar.

The Bias Tester requires a nine-volt battery (not included).

Also available:

EQBMP Extra Set of 2 Octal Probes for BiasMaster - Sugg Retail: 35.00

EQBMP-EL84 Set of 2 EL84 probes for BiasMaster - Sugg Retail: 45.00

RUBY EFFECTS

	RUBY WAH We based the design of our rugged, all metal wah pedal on the legendary tone of the old cry baby wah. The circuit improvements give a wide range wah effect and the chrome finish gives you a sleek look on stage.	Sugg Retail: 89.95
	RUBY A TONE The A Tone allows you to use EL84 tubes in place of 6L6GC, 5881, EL34 or 6V6GT power tubes. Simply plug the A Tone into the power tube sockets of an amplifier, install the supplied EL84 tubes and your ready to go. No modifications are required. The sweet tone of this class A circuit allows the amp to produce its natural overdrive sound at much lower volume levels.	Sugg Retail: 75.00

Tube Effects Loop Kit

EQELI Tube Effects Loop Kit

This 3.5" x 2.5" completely assembled circuit board is ready to drop in. It has adjustable input and output levels, and connects to any supply voltage between 300 and 600 volts. Installation in most popular amps takes about one hour.

Requires 12AU7 Tube.

Suggested Retail: $70.00