Index  Search

EFFECTS

P/N Description
RUBY WAH We based the design of our rugged, all metal wah pedal on the legendary tone of the old cry baby wah. The circuit improvements give a wide range wah effect and the chrome finish gives you a sleek look on stage.
RANGE KING A tone booster with truly great tone! Adds gain to your amp, to get more of its natural overdrive. Includes 9vdc in and ìBallsî control. Kick it on for overdrive and leads and be heard!
F.A.N.T.A. A speaker emulator. It’s a direct out that comes off the speaker line to give you a full tone instead of the dry sound of most direct boxes. Balanced low impedence output.

 

RUBY TONE BONE

The Tone Bone allows you to use EL84 tubes in place of 6L6GC, 5881, EL34 or 6V6GT power tubes. Simply plug the Tone Bone into the power tube sockets of an amplifier, install the supplied EL84 tubes and your ready to go. No modifications are required. The sweet tone of this class A circuit allows the amp to produce its natural overdrive sound at much lower volume levels.
Available in either pentode version for keeping the same tone character or a triode version for a smoother tone and tighter bass response.

EQTB-PH TONE BONE Pentode
EQTB-TH TONE BONE Triode

 

EQELI Tube Effects Loop Kit

This 3.5" x 2.5" completely assembled circuit board is ready to drop in. It has adjustable input and output levels, and connects to any supply voltage between 300 and 600 volts. Installation in most popular amps takes about one hour. Wide bandwidth, low noise, low distortion and ample headroom ensure that this circuit will not alter amplifier tone in any way. Requiring 12AXVA Tube.

The preassembled circuit is designed to be installed between the tone / equalization stage, and the phase inverter / output driver stage. No engineering, modification, calculation, or other tweaking is required.

For hobbyists and project builders, the circuit can be used as a stand-alone single tube preamp / line driver, as an active D.I., or a level translator / buffer for the output of digital audio recording systems.

 

SWITCHES

swithes.JPG (6391 bytes)

<
P N DESCRIPTION
SW1045 DPDT push on-push offswitch. 5a, 125v rating.
SW1045PC DPDT PC mount push-on pull-off switch
SW1045M DPDT Momentary push switch
SW1045M PC DPDT PC mount momentarypush switch
SW1050 Carling DPDT push on-push off switch.3a, 125v rating. Ideal footswitch for custom projects or as a general replacement.
SW1060 Carling SPST push on-push off switch.6a, 125v rating. Exact replacement for Fender footswitch.
SW1070 Carling SPST, 2 position toggle switch 2.75 2.45 2.35 2.25 2.15 1.99 7.50
(with a short, 1/2" toggle). 6a, 125v rating. Exact replacement for the power and standby switches in vintage Fender amps.
SW1075 Carling SPDT, 2 position toggle switch (with a short toggle). Exact replacement for ground switch on vintage Fender amps.
SW1080 Carling SPDT, 3 position toggle switch.6a, 125v rating. Exact replacement for the ground switch in vintage Fender amps.
SW1090 Carling DPDT, 3 position toggle switch. 15a, 125v rating. Crosswired for AC/Ground reversal.
SW2020 SPDT Slide Switch. Commonly used as “Bright” switch.
SW3010 Complete footswitch assembly. Heavy dutymetal housing, 16' cable with 1/4" plug.
SW3020 Same as above but with two switches stereo 1/4" plug.
SW3030 Dual footswitch assembly. Replica 46.95 59.95 of the old Fender reverb/vibrato footswitch.
SW3034 Single footswitch assembly. Replica of the old Fender black vibrato footswitch.
SW3036 Single footswitch assembly. Replica of the old Fender brown vibrato footswitch.

 

footswitch.JPG (7436 bytes)

REVERB CANS

reverb.JPG (8724 bytes)

P N USER LENGTH

#

IMPEDENCE/DC RESISTENCE

INPUT

OUTPUT

4AB3C1B Fender 17" 2 8ohms/.8ohms 2,250ohms/200ohms
4BB2C1B Acoustic/ SLM/Ampeg 17" 2 150ohms/26ohms 2,250ohms/200ohms
4EB2C1B Peavey 17" 2 600ohms/56ohms 2,250ohms/200ohms
4FB3D1B Music Man General 17" 2 1475ohms/200ohms 2,250ohms/200ohms
9AB2C1B Fender Boogie 17" 3 10ohms/.8ohms 2575ohms/200ohms
9EB2C1B Peavey General 17" 3 800/58ohms 2,575/200ohms
9FB2A1C General 17" 3 1,925/200ohms 2,575/200ohms
8AB2A1B Boogie 9" 3 10ohms/.8ohms 2575ohms/200ohms
8BB2A1B SLM 9" 3 190ohms/26ohms 2575ohms/200ohms
8DB2C1B Marshall 9" 3 310ohms/36ohms 2575ohms/200ohms
8EB2C1B Fender 9" 3 800ohms/58ohms 2575ohms/200ohms

 

REVERB BAG

PV92700001 Fits standard 17" reverb can. Great replacement for vintage Fender amps.


ORGAN & LESLIE PARTS

P/N Description
HL1050 122/147 Upper Slow Motor Assembly
HL1060 122/147 Lower Slow Motor Assembly
HL2050 122/147 Upper Slow Motor Rebuild Kit
HL2060 122/147 Lower Slow Motor Rebuild Kit
HL3025 Upper Belt
HL3035 Lower Belt
HL3210 O Ring for Leslie Motor Assembly
HL4010 122 Relay Assembly
HL5020 Replacement Grommet Kit
RUBY RRDJ16 Replacement for Jensen driver used in older Leslies. 16 ohm

 

BACK

RUBY Home | RUBY News | Online Catalog | Tube Talk | Endorsees/links | Dealer Search

Copyright 1997-98 Magic Parts Co.